Influence of hardfacing
International editorial council:
N.P.Alyoshin
U.Diltey
Guan Qiao
D. von Hofe
V.I.Lysak
N.I.Nikiforov
B.E.Paton
Ya. <...> Published below is a selection of papers, which will allow the journal readers to get
an idea about the directions and level of research, performed at PSTU. <...> E.O. Paton Electric Welding Institute
Editorial Board and Editorial Office of the Journal
SPECIALIST TRAINING
AT PSTU WELDING FACULTY
S.V. GULAKOV and V.A. SHAFEROVSKY
Priazovsky State Technical University, Mariupol, Ukraine
Stage-by-stage improvement of the system of student training at the Welding Faculty of the University and features of
their specialization are described. <...> In 1994 Mariupol Metallurgical Institute was
transformed into Priazovsky State Technical University (PSTU) and certified to IV level of accreditation. <...> From 1993 till 1997 PSTU Welding Faculty trained
Bachelors in Welding in four specialities:
• 8.092301 «Equipment and technology of welding
fabrication»;
• 8.092302 «Technological and metallurgical processes of welding»;
• 8.092303 «Automated electric welding processes
and machines»;
• 8.092304 «Equipment and technology of improvement of wear resistance and reconditioning of
machine parts», as well as specialists in technical
fields, called Engineers, and Masters [1—3]. <...> Thus, from 1998 up to 2010
PSTU Welding Faculty conducted training and
awarded diplomas of Bachelors, Specialists (Engineers) and Masters in the following specialities:
• 8.092301 «Technology and equipment of welding» (TEW);
• 8.092302 «Welding systems»;
• 8.092303 «Technology and equipment for reconditioning and improvement of wear resistance of machines and structures» (TERIWRMS);
• 8.090101 «Applied materials science» (AMS). <...> Bachelors, having basic higher education, can get
complete higher education and Specialist qualification
in three specialities having passed the second training
stage (Figure) during two semesters, which is completed by defending the diploma project before the
State Examination Commission. <...> On the whole, training of Masters at the Faculty
is performed by the following schematic (see the Figure):
• after obtaining the qualification of Bachelor, for
one school year (two semesters) on budget funding
basis;
• after obtaining the qualification of Specialist,
for one school year (two semesters) predominantly on
contract basis by individual curricula. <...> At that time, the Ilyich Iron and Steel Works completed preparation for commissioning of its pipe welding shop 1 founded by the initiative and with the
direct participation <...>
The_Paton_Welding_Journal_№8_2011.pdf
International Scientific-Technical and Production Journal
August
2011
# 8
English translation of the monthly «Avtomaticheskaya Svarka» (Automatic Welding) journal published in Russian since 1948
Editor-in-Chief B.E.Paton
Yu.S.Borisov V.F.Khorunov
A.Ya.Ishchenko I.V.Krivtsun
B.V.Khitrovskaya L.M.Lobanov
V.I.Kyrian A.A.Mazur
S.I.Kuchuk-Yatsenko
Yu.N.Lankin I.K.Pokhodnya
V.N.Lipodaev V.D.Poznyakov
V.I.Makhnenko K.A.Yushchenko
O.K.Nazarenko A.T.Zelnichenko
I.A.Ryabtsev
CONTENTS
WELDING FACULTY of PSTU is 40
. and
. Specialist training at
PSTU Welding Faculty ................................................................... 2
. To the 65th Anniversary of the welding
equipment and technology chair of the Priazovsky State
Technical University ...................................................................... 5
. and
N.P.Alyoshin (Russia)
U.Diltey (Germany)
Guan Qiao (China)
D. von Hofe (Germany)
V.I.Lysak (Russia)
N.I.Nikiforov (Russia)
B.E.Paton (Ukraine)
Ya.Pilarczyk (Poland)
G.A.Turichin (Russia)
Zhang Yanmin (China)
A.S.Zubchenko (Russia)
V.N.Lipodaev, V.I.Lokteva
A.T.Zelnichenko (exec. director)
A.A.Fomin, O.S.Kurochko,
I.N.Kutianova, T.K.Vasilenko
N.A.Dmitrieva
D.I.Sereda, T.Yu.Snegiryova
. Influence of hardfacing
technology and heat treatment on structure and properties
of metal deposited on carbon steel by
LN-02Kh25N22AG4M2 strip electrode ........................................... 7
. and
.
Modification of medium-chromium deposited metal ...................... 10
. Effect of manganese on structure and wear
resistance of deposited metal of the low-carbon steel type ........... 12
. and
SCIENTIFIC AND TECHNICAL
. and
. Structure and
properties of deposited wear-resistant Fe—Cr—Mn steel
with a controllable content of metastable austenite ....................... 17
. Admissible pressure
for filler of sealed sleeves used to repair main pipelines ................ 22
. and
. Features of
formation of dissimilar metal joints in hot roll welding in
vacuum ....................................................................................... 27
. and
. and
State Registration Certificate
KV 4790 of 09.01.2001
$324, 12 issues per year,
postage and packaging included.
Back issues available.
All rights reserved.
This publication and each of the articles
contained herein are protected by copyright.
Permission to reproduce material contained in
this journal must be obtained in writing from
the Publisher.
Copies of individual articles may be obtained
from the Publisher.
© PWI, International Association «Welding», 2011
NEWS
Seminar of the Society of Welders of Ukraine ............................... 49
Ukrainian-Polish Scientific-Technical Conference .......................... 51
.
Wear- and heat resistance of deposited metal of
graphitized steel type ................................................................... 33
. Conditions
of propagation of the SHS reaction front in nanolayered
foils in contact with heat-conducting material ............................... 37
. Peculiarities of temperature distribution in
thin-sheet aluminium alloy AMg5M in friction stir welding .............. 42
BRIEF INFORMATION
. Development of the methods for
elimination of deformation of crankshafts in wide-layer
hardfacing ................................................................................... 46
Pub
l
Founders:
E. r
Inte
O
.
Pa iona
a
n
ton Ele
t
ctr
l A
ssocia
t
ic W
e
lding Institute
l
ion «W
e
of the
ding»
NA
S of Ukr
a
ine
isher:
Inte
r
n
a
t
iona
l A
ssocia
t
ion «W
e
l
ding»
Shaferovsky V.A
Gulakov S.V
Editorial b
o
ard:
Royanov V.A
Ivanov V.P
International editorial c
ounc
il:
Stepnov K.K., Matvienko V.N
Malinov V.La
Chejl
Ivashchenko V.Yu
y
kh Ya
.A
Makhnenko V.I., Velikoivanenko E.A., Milenin A.S., Olejnik
O.I., Rozynka G.F
Oldakovsky A.I
Chiga
r
ev V.V
Neklyudov I.M., Bortz B.V
Promotion group:
Translators:or:
Elec
Edi
t
tron galley:
EInte
. P
11, Bozhenko str., 0
.O rnati e x:T a
a o
tonnal A
E
l
E-mai
h
l. (: 3 ( 8044) a
://www.n
ssoc
i
38044)
ttp
Address: 368
ati 0
ectric Weld 200 82 77
,
in
F l: journal@paton.ki
s.gov.u
o Kyiv, U
g In
n «We
stitu
t
200 81 45
ldi k
ngraine
e,
»,
e
Ryabtsev I.A., Kondratiev I.A., Osin V.V
Zaporozhets T.V., Gusak A.M
Poklyatsky A.G
Pivtorak N.I
Tkachenko V.I
v.ua
a/p
w
j
Gord
a
n
G.N
Ustinov A.I
Krivchikov S.Yu
Subscriptions:
Стр.1
Sincere greetings to lecturers, staff and students on the occasion of 65th anniversary
of establishment of the Chair of Equipment and Technology of Welding Fabrication
and 40th anniversary of the Welding Faculty of Priazovsky State Technical University
(PSTU)!
Establishment of the Chair in 1946 and organizing the Welding Faculty at the end of
1971 were of great importance for training specialists on welding and related technologies
for industrial enterprises of the South and South-East of Ukraine, primarily,
Donbass region, as well as rapidly developing metallurgical and mechanical engineering
giants in Mariupol, Kramatorsk, Kharkov and Lugansk. Over the 65 years the Chair
has trained about 6000 specialists, many of which are leading major construction
projects, enterprises, and are at the head of a number of higher educational establishments:
115 graduates of the Chair and Faculty became Candidates of Science, 10
are Doctors of Science and 11 are Professors. Over the last five years the Chair lecturers
prepared 5 manuals approved by Ministry of Education and Science of Ukraine, and
6 monographs. Mariupol school of welders has gained recognition far beyond Ukraine.
During all these years the Chair of Equipment and Technology of Welding Fabrication
and Welding Faculty have been in cooperation with leading scientific and training
centers of Ukraine, China, Poland, Hungary, Slovakia, Czechia, Germany and have
been actively involved in the work of International Association «Welding».
Published below is a selection of papers, which will allow the journal readers to get
an idea about the directions and level of research, performed at PSTU.
E.O. Paton Electric Welding Institute
Editorial Board and Editorial Office of the Journal
SPECIALIST TRAINING
AT PSTU WELDING FACULTY
S.V. GULAKOV and V.A. SHAFEROVSKY
Priazovsky State Technical University, Mariupol, Ukraine
Stage-by-stage improvement of the system of student training at the Welding Faculty of the University and features of
their specialization are described. At present specialist training is performed under the conditions of multilevel system
of higher education.
Keywords: welding fabrication, higher education, specialist
training, Bachelors, Specialists, Masters, curricula, modulerating
system
The first group of welding engineers graduated from
Mariupol (Zhdanov) Metallurgical Institute in 1947.
With each year the number of specialists graduating
after different forms of training increased and by now
it has risen to 5000 persons. Annual intake of applicants
to the Welding Faculty was about 100 persons
up to 1996.
In 1994 Mariupol Metallurgical Institute was
transformed into Priazovsky State Technical University
(PSTU) and certified to IV level of accreditation.
From 1993 till 1997 PSTU Welding Faculty trained
Bachelors in Welding in four specialities:
© S.V. GULAKOV and V.A. SHAFEROVSKY, 2011
2
8/2011
• 8.092301 «Equipment and technology of welding
fabrication»;
• 8.092302 «Technological and metallurgical processes
of welding»;
• 8.092303 «Automated electric welding processes
and machines»;
• 8.092304 «Equipment and technology of improvement
of wear resistance and reconditioning of
machine parts», as well as specialists in technical
fields, called Engineers, and Masters [1—3].
At the end of 1998 Materials Science Chair was
added to the Faculty. In the same year the Ministry
of Education and Science of Ukraine took a decision
on changing a number of names of specialities, in
particular in 0923 «Welding» and 0901 «Applied Materials
Science» training fields.
Here
speciality
8.092302 «Technological and metallurgical processes
Стр.2